See FISITA Library items from Xueyuan Nie
Prof. Dr. Xueyuan Nie, University of Windsor, CANADA
Ms. Ran Cai, Univ. of Windsor, CANADA
Ms. Jingzeng Zhang, Univ. of Windsor, CANADA
Dr. Jimi Tjong, Univ. of Windsor, CANADA
Regenerative brake, disc coatings or pad formulations with new tribology aim to avoid generating brake wear particulates on one hand. On the other hand, vacuum and filter systems aim to collect the particulate matter for disposal. This paper will briefly describe the non-exhaust emission (NEE) and corrosion issues of brake systems of electrical vehicles (EV). The methods reported for NEE reduction will then be concisely reviewed. A new cost-effective coating technology, called PEA (plasma electrolytic aluminating), will be particularly presented in this talk for fighting NEE where alumina-coatings are prepared on commercial cast iron brake discs. Brake dynamometer test results show the coatings can increase friction levels and reduce wear for both brake discs and pads. The coatings can greatly increase corrosion/rust resistance. A car test also shows that the coated discs can reduce the braking distance and make wheel rims much cleaner. The better driving comfort and modulation should result from more consistent friction forces and less stick-slip problems during each brake event, which is a very important performance factor for advanced driver assistance systems (ADAS) and autonomous driving systems of EV. It is expected that the coated discs may last as long as the lifespan of passenger cars. Therefore, the sapphire coatings would benefit the brake system in terms of better sustainability and environmental friendliness.
Error message goes here.
Xueyuan Nie is a full Professor in Department of Mechanical, Automotive & Materials Engineering at University of Windsor, Canada. He has published about 200 journals and proceeding papers (with high impact factors) and holds several Canadian and U.S. patents. Nie has conducted multimillion dollars’ research projects related to surface & coatings technologies, manufacturing process, nanomaterials, biomaterials, energy-related materials, tribology and wear, corrosion and erosion, and nano/micro-mechanical properties, thermal management, and MEMS in U.K., U.S.A. and Canada. His research projects have been sponsored by Federal and Provincial Funding Agencies in Canada and DOE (U.S.) and Ford, GM, FCA, and other industries.
Prof. Dr. Xueyuan Nie
FISITA Committees & Groups
News on FISITA Spotlight
16 July 2021
Stay up to date with FISITA Spotlight
Excerpt from the blog goes here - this will give the reader a brief snapshot of what the post is about...
16 July 2021