See FISITA Library items from David Hesse

EB2021-EBS-003

Paper + Video + Slides

Abstract

Mrs. Katharina Kolbeck, BMW/ Technical University Ilmenau, GERMANY

Mr. Matthias Bernhard, BMW, GERMANY

Mr. Thomas Schröder, BMW, GERMANY

Dr. David Hesse, Technical University Ilmenau, GERMANY

Prof. Dr.-Ing. Klaus Augsburg, Technical University Ilmenau, GERMANY


The share of exhaust particles of particulate pollution caused by traffic is declining due to electrification and improved exhaust after treatment. Sources like tire, road and the brake are moving into the socio-political focus. For this reason, the UNECE mandated the Particle Measurement Program (PMP) to investigate brake particle emissions. Their task is to develop a methodology, including a cycle, to measure particulate emissions from vehicle brakes. In addition to the emission measurement cycle, a run-in procedure for the brake is also necessary to ensure a stable friction and emission behavior. The PMP proposes to repeat the WLTP-Brake cycle five times, which is time consuming and has not yet been sufficiently evaluated for its suitability as a run-in procedure. Therefore, the aim of this study is to investigate the influence of different run-in procedures on particle emission. This is done by measuring the particle number concentration of new brakes after different run-in procedures at a test stand with an enclosed constant volume sampling system. The results show that the run-in methodology strongly influences the emission behavior in terms of the stability of the following measurements and the reproducibility.

EuroBrake 2021

BEM1

WATCH VIDEO
DOWNLOAD PDF
DOWNLOAD SLIDES

Downloads

Error message goes here.

arrow&v

Person profile goes here.

Germany

research assistant

Company Text

Job title

Company Name

Company Text

Dr. David Hesse

FISITA Committees & Groups

Executive Board

See news about David Hesse on FISITA Spotlight

Register now for EuroBrake 2021 and gain access to nine years of technical content

Register now for EuroBrake 2021 to access over 400 technical papers that have led the discussion of brake technology in the last decade

18 Mar 2021