Preliminary Programme

The FISITA Web Congress 2020 will feature about 90 technical papers with many offering a virtual presentation. Papers and presentations will be available on this website from November onwards.

In addition to the technical papers, the Web Congress will host an online keynote session on 24 November 2020. This session will feature speakers from Future Matters, Porsche Engineering, the Aspen Institute and Škoda Auto. Registration will open soon however you can sign up to receive updates here.

The preliminary list of papers is below and the final programme will be published in October.

1. DGT - Digital Transformation

F2020-DGT-007
Customer-Focussed Automatic Test Course Design

Mr. Florian Grober, Volkswagen AG, GERMANY
Dr.-Ing. Andreas Janßen, Volkswagen AG, GERMANY
Prof. Dr.-Ing. Ferit Küçükay, TU Braunschweig, GERMANY

F2020-DGT-012
upBUS – Electrical, autonomous driving, transmodular bus for public transport systems

Mr. Tobias Meinert, Institute of Structural Mechanics and Lightweight Design of RWTH Aachen University, GERMANY
Mr. Mauricio Chaves-Vargas, upBUS UG (haftungsbeschränkt), GERMANY
Mr. David Bierbüsse, Chair of High Frequency Electronics, GERMANY
Mr. Eduard Heidebrecht, Chair of High Frequency Electronics of RWTH Aachen University, GERMANY
Prof. Dr.-Ing. Renato Negra, Chair of High Frequency Electronics of RWTH Aachen University, GERMANY
Prof. Dr.-Ing. Kai-Uwe Schröder, Institute of Structural Mechanics and Lightweight Design of RWTH Aachen University, GERMANY

F2020-DGT-016
New Approaches to Digitalizing the Design and Validation Process of Complex Mount Bearings with the Focus on Durability

Dipl.-Ing. Steven Ernst, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Dipl.-Ing. Felix Schmid, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Dr.-Ing. Kay Büttner, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Prof. Dr.-Ing. Günther Prokop, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY

F2020-DGT-020
Carsharing for students – way to speed-up transformation of mobility

Ing. Marko Šidlovský, Czech Technical University in Prague, CZECH REPUBLIC
Ms. Dominika Svárovská, University of Economics, Prague, CZECH REPUBLIC
Dr.-Ing. Václav Jirovský, Czech Technical University in Prague, CZECH REPUBLIC
Dr.-Ing. Petr Král, University of Economics, Prague, CZECH REPUBLIC
Prof. Dr.-Ing. Luboš Smutka, Czech University of Life Sciences, CZECH REPUBLIC

F2020-DGT-031
A Method for User-Friendly PID-Parameter Optimization for Highly Dynamic Component Test Benches

Mr. Kai Wolter, Karlsruher Institut für Technologie - Institut für Produktentwicklung, GERMANY

2. ADM - Advanced Vehicle Driveline and Energy Management

F2020-ADM-002
Battery Electric Vehicles with Small Battery Pack and High Efficiency on board Electricity Production by a Combustion Engine

Dr. Alberto Boretti, Prince Mohammad Bin Fahad University, SAUDI ARABIA

F2020-ADM-006
Battery to wheels and wheels to battery energy transmission and conversion in a Chevrolet Spark

Prof. Alberto Boretti, Prince Mohammad Bin Fahad University, SAUDI ARABIA

F2020-ADM-030
Research on Electromagnetic Vibration and Noise Characteristics of Double-rotor Permanent Magnet Synchronous In-wheel Motor

Prof. Dr.-Ing. Lijun Zhang, Tongji University, CHINA
Mr. Jie Xu, Tongji Univeristy, CHINA
Dr.-Ing. Dejian Meng, Tongji Univeristy, CHINA

F2020-ADM-040
Raising the thermal limits of an electrical motor based on an air gap winding by applying improved laminated layers and optimized cooling duct geometries

Dr. Joerg Sauerhering, Otto-von-Guericke-University-Magdeburg, GERMANY
Dr. Gunar Boye, Otto-von-Guericke-University-Magdeburg, GERMANY
Prof. Dr. Frank Beyrau, Otto-von-Guericke-University-Magdeburg, GERMANY
Mr. Sergey Perekopskiy, Otto-von-Guericke-University-Magdeburg, GERMANY
Mrs. Olena Stamann, Otto-von-Guericke-University-Magdeburg, GERMANY

F2020-ADM-047
Research on the Electric Power Coordinated Control of the Series Electromechanical Mechanical Transmission System Based on Reinforcement Learning

Ms. Lin Bo, Beijing Institute of Technology, CHINA
Mr. Lijin Han, Beijing Institute of Technology, CHINA

F2020-ADM-055
Combined Cycle Gas Turbine System Optimization for Extended Range Electric Vehicles

Dr. Eng. Charbel Mansour, Lebanese American University, UNITED STATES
Ms. Aya Barakat, Lebanese American University, UNITED STATES

F2020-ADM-060
Capacity characteristics analysis and remaining useful life estimation method of ternary lithium battery pack

Mr. Weijian Li, South China University of Technology, CHINA
Prof. Dr. Fengchong Lan, South China University of Technology, CHINA
Prof. Dr. Jiqing Chen, South China University of Technology, CHINA
Dr. Yigang Li, South China University of Technology, CHINA

F2020-ADM-061
Numerical investigation on heat dissipation performance of wickless heat pipe cooling for lithium battery

Mr. Chao Wang, Guizhou university, CHINA
Prof. Dr. Jin Zhao, Guizhou university, CHINA
Mr. Kuncheng Lai, Guizhou university, CHINA

F2020-ADM-071
Design and Simulation of Braking System for Off-Road Vehicles

Mr. SWAPNIL KUMAR, Vellore Institute of Technology, Vellore, INDIA
Dr. Thundil Karuppa Raj Rajagopal, Vellore Institute of Technology, Vellore, INDIA

F2020-ADM-073
A new engine concept to control the ignition timing of HCCI combustion: Piston Assisted Compression Ignition (PACI)

Dr. Louis Sileghem, Ghent University, BELGIUM

F2020-ADM-081
The new solutions of energy utilization of the exhaust gases of the internal combustion engines through hybrid turbochargers

Ing. Rares Lucian Chiriac, "Transilvania" University, ROMANIA
Prof. Dr.-Ing. Anghel Chiru, "Transilvania" University, ROMANIA

F2020-ADM-085
Suitability of Using Electric Vehicles in Asia Countries

Mr. Tiande MO, Hong Kong Productivity Council, CHINA - HONG KONG
Prof. LAU Kin Tak, Swinburne University of Technology, AUSTRALIA
Dr. Chi Kin POON, Hong Kong Productivity Council, CHINA - HONG KONG
Xiaohua Ge, Swinburne University of Technology, AUSTRALIA
Mr. Yu LI, Hong Kong Productivity Council, CHINA - HONG KONG
Mr. Chuliang SHAN, Hong Kong Productivity Council, CHINA - HONG KONG

F2020-ADM-091
Redesigning the catalytic converter to decrease the backpressure in the exhaust system using Thermionic energy converter.

Mr. Rahul Bhalerao, National Institute of Technology, Raipur, INDIA

F2020-ADM-126
Data-Based Parameterization of Thermal Models of a Gearbox

Dipl.-Ing. Erwin Brosch, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren Stuttgart, GERMANY

Mr. M. Sc. Alfons Wagner, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren Stuttgart, GERMANY

Prof. Dr.-Ing. Hans-Christian Reuss, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren Stuttgart, GERMANY

3. EPV - Emissions and Pollutants Caused by Vehicles

F2020-EPV-005
A Development of SCR(Selective Catalytic Reduction) model and its applications

Mr. SUNG MU CHOI, Hyundai Motor Company, REPUBLIC OF KOREA

Mr. Ji Ho Cho, Hyundai Motor Company, REPUBLIC OF KOREA

Dr. Chang Hwan Kim, Hyundai Motor Company, REPUBLIC OF KOREA

F2020-EPV-014
Optimization Design of Large-displacement Motorcycle Emission Testing Procedures

Mr. Wanli YUAN, CCIC WEST TESTING COMPANY LIMITED, CHINA

Mr. Tiande MO, Hong Kong Productivity Council, CHINA - HONG KONG

Mr. Yu LI, Hong Kong Productivity Council, CHINA - HONG KONG

Mr. Baomin DUAN, CCIC WEST TESTING COMPANY LIMITED, CHINA

Mr. Wei ZHONG, CHINA QUALITY CERTIFICATION CENTRE, CHINA

F2020-EPV-027
Analytical Investigation of Tire Induced Particle Emissions

Mr. Toni Feißel, TU Ilmenau, GERMANY

Prof. Dr.-Ing. Klaus Augsburg, TU Ilmenau, GERMANY

F2020-EPV-028
High fuel pressure and multiple injection of gasoline for the particle emission reduction under cold conditions

Mr. Naoki Yoneya, Hitachi, Ltd., JAPAN

Mr. Sebastian Blochum, Technical University of Munich, Institute of Internal Combustion Engines, GERMANY

Prof. Dr.-Ing. Georg Wachtmeister, Technical University of Munich, Institute of Internal Combustion Engines, GERMANY

Mr. Yoshihito Yasukawa, Hitachi Automotive Systems Europe GmbH, GERMANY

Mr. Yuki Sugiyama, Hitachi Automotive Systems, Ltd., JAPAN

F2020-EPV-046
Improving Diesel Engine Fuel Efficiency over Transient Cycle using 1-D Thermodynamic Simulation

Mr. Ajay Nain, Tafe Motors and Tractor Limited, INDIA

F2020-EPV-048
A Cost Effective and Fuel Efficient Solution by Downsizing Diesel Engine using 1-D/3-D Simulation Approach

Mr. Ajay Nain, Tafe Motors and Tractor Limited, INDIA

F2020-EPV-057
Thermionic emission analysis of a waste heat recovery system designed for a hybrid electric vehicle.

Mr. Kantaprasad Kodihal, Bahrtiya Skill Development University jaipur, INDIA

Dr. Ankur Sagar, Bhartiya Skill Development University Jaipur, INDIA

F2020-EPV-071
Real-time torque estimation of an air conditioner compressor for the CO2 emissions reduction from an engine vehicle

Mr. Jung-Myung Kwak, Hanon systems, REPUBLIC OF KOREA

Mr. Yong-Hee Kim, Hanon systems, REPUBLIC OF KOREA

Mr. Peter Zawadzky, TE, GERMANY

Mr. Simon Scherner, TE, GERMANY

4. CAF - Conventional and Alternative Fuels and Lubricants

F2020-CAF-001
Improving Efficiency and Power Density of Hydrogen Engines of Positive Ignition Single-Fuel and Compression Ignition Dual-Fuel designs

Dr. Alberto Boretti, Prince Mohammad Bin Fahad University, SAUDI ARABIA

F2020-CAF-007
Fluid Dynamics Analysis of Bubble Generation Process in Engine Oil Based on Model Experiments

Dr. Masao Ishihama, Kanagawa University, JAPAN

F2020-CAF-017
Fuel Cell Vehicle Technology Roadmaps: A Global Perspective

Ms. Zhexuan Mu, Tsinghua University, CHINA

5. MCF - Mobility Comfort

F2020-MCF-002
The Control Strategy Research on Reduction of High-Frequency Noise and Vibration for Permanent Magnet Synchronous Motor

Ms. Lulu Wei, Jilin University, CHINA

Prof. Fangwu Ma, Jilin University, CHINA

Dr. Hongbin Yin, Shandong University of Technology, CHINA

Dr. Liang Wu, Jilin University, CHINA

Mr. Hui Gao, China Automotive Technology and Research Center Co., Ltd., CHINA

F2020-MCF-006
Vibration Transmissibility Analyses of Asymmetric Cantilevered Structures with Screw Fastening by Mode Equivalent Factors

Dr. Gyoko Oh, Tokyo Roki Co., Ltd., JAPAN

F2020-MCF-012
Start-up transient Vibration analysis and control of a vehicle equipped with a 3-cylinered engine

Dr. yan jin, china automotie engineering research institute Co.Ltd, CHINA

F2020-MCF-020
Factors Affecting Squeak Characteristics of Plastic Parts And Its Prevention Solutions

Mr. Amit Kumar, Mahindra & Mahindra Ltd, INDIA

Mrs. Edlin Lewis, Mahindra & Mahindra Ltd., INDIA

Mr. Mohammed Riyazuddin, Mahindra & Mahindra Ltd., INDIA

Mr. Raghavendran Prasath, Mahindra & Mahindra Ltd., INDIA

Mr. Sandeep Shukla, Mahindra & Mahindra Ltd., INDIA

F2020-MCF-057
Study and Reduce the Interior Noise Roughness During Acceleration

Dr. yan jin, china automotie engineering research institute Co.Ltd, CHINA

F2020-MCF-060
Weight Reduction and Performance improvement in NVH insulators using alternative material

Mr. Arvind Kochi Sabesan, Mahindra & Mahindra Ltd., INDIA

Mr. Benny Rediers, Mahindra Automotive North America, UNITED STATES

Mr. Aniket Parbat, Mahindra Automotive North America, UNITED STATES

Mr. Phani Kakani, Mahindra & Mahindra Ltd., INDIA

Mr. Manganarayana Patnaik, Mahindra & Mahindra Ltd., INDIA

Mr. Manish Deoli, Mahindra & Mahindra Ltd., INDIA

F2020-MCF-062
Vibro-acoustic reciprocity analysis using dodecahedral sound source and its application for material assessment

Mr. Nitesh Anerao, Mahindra & Mahindra Ltd., INDIA

Mr. Tulesh Kumar, Mahindra & Mahindra Ltd., INDIA

F2020-MCF-066
Vibration behavior of powertrain test benches - measurement, analysis and modelling

Mr. Alfons Wagner, FKFS - Research Institute of Automotive Engineering and Vehicle Engines Stuttgart, GERMANY

Dipl.-Ing. Erwin Brosch, FKFS - Research Institute of Automotive Engineering and Vehicle Engines Stuttgart, GERMANY

F2020-MCF-068
Effective vehicle noise management through unique combination of noise control treatment at engine compartment

Mr. ALEX VARGHESE, 3M, INDIA

Mr. Satish Palled, 3M, INDIA

F2020-MCF-088
Kalman filter based active noise control for vibro-acoustic cavities

Dr. Amrita Puri, Indian Institute of Technology, Jodhpur, INDIA

Prof. Subodh V. Modak, IIT Delhi, INDIA

Prof. Kshitij Gupta, IIT Delhi, INDIA

6. ACM - Automated and Connected Mobility

F2020-ACM-004
Research on system identification of vehicle model for model based reinforcement learning automated parking

Dr. Shaoyu Song, Tongji university, CHINA

Prof. Dr.-Ing. Hui Chen, Tongji university, CHINA

Dr. Jiren Zhang, Tongji university, CHINA

Mr. Fengwei Hu, Tongji university, CHINA 

F2020-ACM-019
Coupling Apollo with the CommonRoad Motion Planning Framework

Ms. Xiao Wang, Technische Universität München, GERMANY

Ms. Anna-Katharina Rettinger, Technische Universität München, GERMANY

Prof. Dr.-Ing. Matthias Althoff, Technische Universität München, GERMANY

Dr. Md Tawhid Bin Waez, Ford Motor Company, UNITED STATES

F2020-ACM-028
MPC-based shared steering system using torque control for collaborative driving

Ms. Andrea Michelle Rios Lazcano, Delft University of Technology, NETHERLANDS

Dr. Barys Shyrokau, Delft University of Technology, NETHERLANDS

Dipl.-Ing. Tenghao Niu, Cambridge University, UNITED KINGDOM

Dr. David Cole, Cambridge University, UNITED KINGDOM

Dr.-Ing. Xabier Carrera Akutain, Toyota Motor Europe NV/SA, BELGIUM

F2020-ACM-042
Positioning Sensor System for transmodular Mobility

Mr. David Bierbuesse, RWTH Aachen University, GERMANY

Mr. Eduard Heidebreicht, RWTH Aachen University, GERMANY

Mr. Tobias Meinert, RWTH Aachen University, GERMANY

Mr. Mauricio Chaves-Vargas, upBUS UG (haftungsbeschränkt), GERMANY

Prof. Dr. Renato Negra, RWTH Aachen University, GERMANY

Prof. Dr. Kai-Uwe Schröder, RWTH Aachen University, GERMANY 

F2020-ACM-044
Human vs. Automation - Who Drives the Future?

Dr.-Ing. Václav Jirovský, Czech Technical University in Prague, Faculty of Transportation Sciences/Faculty of Mechanical Engineering, CZECH REPUBLIC

F2020-ACM-065
Assessing the Readiness of Infrastructure for Automated Vehicles from a safety perspective

Mrs. Lina Konstantinopoulou, EuroRAP, BELGIUM

Mr. Anthony Germanchev, ARRB, AUSTRALIA

Mr. Marko Ševrović, University of Zagreb, CROATIA

Mr. James Bradford, iRAP, UNITED KINGDOM

F2020-ACM-066
A Model Predictive Control Based Lane Shift Actuation System To Detect Vehicles In The Moving Blind Spot Zones.

Mr. Sameer Rafiq Shah, University of Michigan - Dearborn, UNITED STATES

Dr. Randy Boone, Ford Motor Company, UNITED STATES

Ms. Suman Fathima Abzal Pasha, Politecnico di Torino, ITALY

F2020-ACM-067
Evaluating autonomous functions performance through simulation using interoperable sensor, vehicle, and environment models

Dipl.-Ing. Serge Laverdure, ESI Group, FRANCE

Dr. Mokrane Hadj-Bachir, Esi Group, FRANCE

Ing. Philippe De Souza, ESI Group, FRANCE

Dr. Dominique Gruyer, Ifsttar, FRANCE

F2020-ACM-069
Automated Turning Traveling to the Specified Exit Point

Dr. Eng. Takeshi Takiyama, Osaka City University, JAPAN

Dipl.-Ing. Jinichi Fujita, Osaka City University , Graduate school., JAPAN

F2020-ACM-072
Developing ADAS (LCA) with MATLAB / Simulink (R2018b)

Mr. Thaddäus Menzel, IDIADA Fahrzeugtechnik GmbH, GERMANY

Mr. Patrick Fischer, IDIADA Fahrzeugtechnik GmbH, GERMANY

F2020-ACM-073
Methodology for Automated Definition of Critical Scenarios

Mr. Thaddäus Menzel, IDIADA Fahrzeugtechnik GmbH, GERMANY

Mr. Thiago de Borba, IDIADA Fahrzeugtechnik GmbH, GERMANY

F2020-ACM-083
Sensor Time Synchronization in Smart Road Infrastructure

Mr. Numan Senel, Technische Hochschule Ingolstadt, GERMANY

Prof. Dr. Gordon Elger, Technische Hochschule Ingolstadt, GERMANY

Prof. Dr. Andreas Festag, Fraunhofer IVI Applied Research Center for Connected Mobility and Infrastructure, GERMANY

F2020-ACM-096
Scenario Based Testing of Automated Driving Systems: A Literature Survey

Dipl.-Ing. Demin Nalic, University of Technology Graz, AUSTRIA

Dipl.-Ing. Tomislav Mihalj, TU Graz, AUSTRIA

Dipl.-Ing. Maximilian Bäumler, TU Dresden, GERMANY

Dipl.-Ing. Matthias Lehmann, TU Dresden, GERMANY

Prof. Dr.-Ing. Arno Eichberger, TU Graz, AUSTRIA

7. VDC - Vehicle Dynamics and Controls

F2020-VDC-010
Establishment of Ride Comfort Characteristics of Heavy Articulated Tractor- Semitrailer using MATLAB Simulink.

Mr. SARNAB DEBNATH, VE COMMERCIAL VEHICLES LTD., INDIA

Mr. KRISHNA ACHANTA, VE COMMERCIAL VEHICLES LTD., INDIA

F2020-VDC-011
Experimental and Simulative Analysis of Tire Enveloping Characteristics Based on a Tire Measurement Database

Dipl.-Ing. Yun Pang, Technische Universität Dresden, GERMANY

Dipl.-Ing. Tobias Schramm, Technische Universität Dresden, GERMANY

Dipl.-Ing. Jan Kubenz, Technische Universität Dresden, GERMANY

Prof. Dr.-Ing. Günther Prokop, Technische Universität Dresden, GERMANY

F2020-VDC-024
Diagram expressing stability and maximum lateral acceleration in turning during braking and analysis using it

Prof. Dr. Hideki Sakai, Kindai University, JAPAN

F2020-VDC-025
Planar vehicle model to reflect driver’s subjective evaluation

Prof. Dr. Hideki Sakai, Kindai University, JAPAN

F2020-VDC-042
Coordinated control of AFS and DYC for 4WID-EVS handling and stability based on driving state prediction

Dr. Cong Liu, Beijing Institute of Technology, CHINA

Prof. Dr. Hui Liu, Beijing Institute of Technology, CHINA

F2020-VDC-047
Validity Quantification of Driver-in-the-Loop Simulation in Motorsport

Mr. Thomas Schwarzhuber, BMW Motorsport, GERMANY

Mr. Lukas Wörle, BMW Motorsport, GERMANY

Dr.-Ing. Michael Graf, BMW Motorsport, GERMANY

Prof. Arno Eichberger, Graz University of Technology, AUSTRIA

F2020-VDC-070
Impact on the Quality of Automated Lateral driving when Implementing an 2DOF Steering Model and Vary Driving Dynamic Quantities

Mr. Julian Staiger, TU Delft, NETHERLANDS

F2020-VDC-074
Subjective perception prognosis of divergent data sets of the shift strategy of modern dual-clutch transmissions on the basis of simulation results

Dipl.-Ing. John Köber, Karlsruhe Institute of Technology (KIT), IPEK - Institute of Product Engineering, GERMANY

Prof. Dr.-Ing. Albert Albers, Karlsruhe Institute of Technology (KIT), IPEK - Institute of Product Engineering, GERMANY

Paula Marta Jacobs, TU Braunschweig, GERMANY

Ercan Karakus, Hochschule Albstadt-Sigmaringen, GERMANY

F2020-VDC-075
Development of Lateral Control for Different Electric Vehicle Drive and Steering Systems

Dipl.-Ing. Amauri da Silva Junior, Technische Hochschule Ingolstadt, GERMANY

Prof. Dr.-Ing. Christian Birkner, Technische Hochschule Ingolstadt, GERMANY

Mr. Naveen Shirur, Technische Hochschule Ingolstadt, GERMANY

F2020-VDC-081
Design and Development Of An In-Wheel Suspension With Novel Automatic Camber Control Strategy For Improved Handling

Mr. Sameer Rafiq Shah, University of Michigan - Dearborn, UNITED STATES

Mr. Dilip Kumar, Sir M. Visvesvaraya Institute of Technology, INDIA

Mr. Nishant Tiwari, Sir M. Visvesvaraya Institute of Technology, INDIA

F2020-VDC-089
Drive-by-wire vehicle traction control system with predefined safety limits

Ing. Denis Efremov, Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control Engineering, CZECH REPUBLIC

Dr.-Ing. Tomas Hanis, Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control Engineering, CZECH REPUBLIC

Ing. David Vosahlik, Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control Engineering, CZECH REPUBLIC

Dr.-Ing. Martin Klauco, Institute of Information Engineering, Automation, and Mathematics, Slovak University of Technology in Bratislava, SLOVAKIA

F2020-VDC-094
Hybrid Approach to Identify Kinematic Points of a Suspension System

Dipl.-Ing. Clemens Deubel, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY

Mr. Peter Hoffmann, Technische Universität Dresden, GERMANY

Mr. Chao Liu, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY

Dipl.-Ing. Jan Kubenz, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY

Prof. Dr.-Ing. Günther Prokop, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY

8. PIF - Passive and Integral Safety

F2020-PIF-007
Optimizing IP stiffness to minimize Knee Shear Injury in Offset Deformable Crash

Mr. Vineeth Kumar KethamReddy, Mahindra & Mahindra Ltd, INDIA

Mr. Siva Reddy Kummathi, Mahindra & Mahindra Ltd, INDIA

F2020-PIF-017
Crashworthiness of C-SMC : a Structural Battery Case for Automotive Application

Mr. Federico Coren, Tu Graz, Institut of Automotive Engineering, AUSTRIA

Mr. Philipp S. Stelzer, Institut für Polymer Product Engineering, Johannes Kepler University Linz - JKU, AUSTRIA

F2020-PIF-033
Collision Prediction for Irreversible Pre-Crash Safety Measures

Mr. Robert Lugner, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY

Mr. Maximilian Inderst, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY

Mr. Gerald Sequeira, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY

Mr. Kilian Schneider, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY

Prof. Dr.-Ing. Thomas Brandmeier, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY

F2020-PIF-038
Parameterization of standard test scenarios of automated vehicles using accident simulation data

Dipl.-Ing. Martin Urban, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY

Dipl.-Ing. Jorge Lorente Mallada, Toyota Motor Europe, BELGIUM

Dipl.-Ing. Maria Pohle, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY

Dr.-Ing. Christian T. Erbsmehl, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY

Dr.-Ing. Pablo Puente Guillen, Toyota Motor Europe, BELGIUM

Dipl.-Ing. Satoshi Taniguchi, Toyota Motor Corporation, JAPAN

Dr.-Ing. Tom Landgraf, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY

F2020-PIF-039
A methodology for building simulation files from police recorded accident data (for ADAS effectiveness assessment)

Mr. Martin Urban, Fraunhofer Institute for Transportation and Infrastructure Systems, GERMANY

Dr.-Ing. Christian T. Erbsmehl, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY

Dipl.-Ing. Jorge Lorente Mallada, Toyota Motor Europe, BELGIUM

Dr.-Ing. Pablo Puente Guillen, Toyota Motor Europe, BELGIUM

Dipl.-Ing. Satoshi Taniguchi, Toyota Motor Corporation, JAPAN

F2020-PIF-042
Development of an Advanced Vehicle Restraint Systems with Special Consideration of Small Occupants with help of an Adaptive Steering Column

Mr. Felix Bentgens, Trier University of Applied Sciences, GERMANY

Prof. Dr.-Ing. Peter Koenig, Trier University of Applied Sciences, GERMANY

Mr. Marco Mueller, Trier University of Applied Sciences, GERMANY

Dr. Jaikumar Mayakrishnan, Hindustan Institute of Technology & Science, INDIA

Mr. Raghavendran Pala Raviramachandran, Hindustan Institute of Technology & Science, INDIA

F2020-PIF-046
Passenger Evacuation and Safety System for case of Crash and Drowning

Mr. Ritul Singh, University of Petroleum and Energy Studies, INDIA

F2020-PIF-048
Tagging Real-World Scenarios for the Assessment of Autonomous Vehicles

Mr. Erwin de Gelder, TNO, NETHERLANDS

Dr. Olaf Op den Camp, TNO, NETHERLANDS

F2020-PIF-049
Automatic Car Reverse Braking System Based on a ToF Camera Sensor

Mr. Rodrigo Negri de Azeredo, Federal University of Parana - UFPR, BRAZIL

Prof. Dr. Ondrej Vaculin, Technische Hochschule Ingolstadt - THI, GERMANY

Prof. Dr. Gustavo Henrique da Costa Oliveira, Federal University of Parana - UFPR, BRAZIL

F2020-PIF-051
Estimation of the Impact of Human Body Variation on Its Crash Behavior Using Machine Learning Methods

Mr. Franz Plaschkies, Technische Hochschule Ingolstadt / CARISSMA, GERMANY

Prof. Ondrej Vaculin, Technische Hochschule Ingolstadt, GERMANY

9. VES - Vehicle Electronics and Software

F2020-VES-002
A Real-Time and Calibration-Free Lane Departure Warning System for AUTOSAR-Based ECUs

Mr. Islam Gamal, Mentor Graphics, EGYPT

Mr. Ahmed Hamed, Mentor Graphics, EGYPT

F2020-VES-014
Procedure for the Safety Assessment of an Autonomous Vehicle Using Real-World Scenarios

Mr. Erwin de Gelder, TNO, NETHERLANDS

Dr. Olaf Op den Camp, TNO, NETHERLANDS

F2020-VES-016
Bus-independent Instruction Set Architecture for Handling Long Protocol Data Units in AUTOSAR-based Automotive ECUs

Ing. Ahmed Mohamed Moro Ahmed Hamed, Mentor, A Siemens Business, EGYPT

Dr. Mona Safar, Ain Shams University, Department of Computer and Systems Engineering, Cairo, Egypt, EGYPT

Prof. Dr. M. Watheq El-Kharashi, Ain Shams University, Department of Computer and Systems Engineering, Cairo, Egypt, EGYPT

Prof. Dr. Ashraf Salem, Mentor, A Siemens Business, Cairo, Egypt, EGYPT

F2020-VES-017
Agile Software Design Verification and Validation (V&V) for Automated Driving

Dr. Yixiao Li, Nagoya University, JAPAN

Prof. Dr. Yutaka Matsubara, Nagoya University, JAPAN

Mr. Daniel Olbrys, Toyota Research Institute - Advanced Development, Inc., UNITED STATES

Mr. Kazuhiro Kajio, Toyota Research Institute - Advanced Development, Inc., JAPAN

Mr. Takashi Inada, Toyota Research Institute - Advanced Development, Inc., JAPAN

Prof. Dr. Hiroaki Takada, Nagoya University, JAPAN

F2020-VES-018
Analysis of the influence of range extender system design on the vehicle NVH performance

Mr. Chen Jingchang, China Automotive Engineering Research Institute Co., Ltd, CHINA

Mr. Li peiran, China Automotive Engineering Research Institute Co., Ltd, CHINA

F2020-VES-020
A STPA-based Approach for Systematic Security Analysis of In-vehicle Diagnostic and Software Update Systems

Jinghua Yu, Tongji University, CHINA

Prof. Dr. Stefan Wagner, University of Stuttgart, GERMANY

Prof. Dr. Feng Luo, Tongji University, CHINA

10. MML - Manufacturing, Materials and Lightweight Solutions

F2020-MML-001
Surface Modification for Green Tribology -Anodizing of Aluminium for Cylinder Liner Application

Prof. Dr. Rajendran Raj, SRM Institute of Science and Technology, INDIA

Dr. Tamilarasan T R, Crescent Institute of Science and Technology, INDIA

Mr. Riyaaz Uddien Shaik, Sapienza University of Rome, ITALY

F2020-MML-008
On selection of a technological course of the agricultural tractors development

Mr. Alexandr Lavrov, Federal Scientific Agriculture Center VIM, RUSSIAN FEDERATION

Mr. Vladimir Shevtsov, Federal Scientific Agriculture Center VIM, RUSSIAN FEDERATION

Mr. Anatoly Gulyaev, Federal Scientific Agriculture Center VIM, RUSSIAN FEDERATION

Ms. Valeriy Zubina, Federal Scientific Agriculture Center VIM, RUSSIAN FEDERATION

F2020-MML-013
Influence of Delayed Cure Time in Properties of Structural Adhesives

Mr. Sandeep Shukla, Mahindra & Mahindra, INDIA

Mr. Babu Mahendran, Mahindra and Mahindra, INDIA

F2020-MML-026
Concept Level Performance improvement in Frame with Light-weighting

Mr. Mihir Bhalerao, Mahindra & Mahindra Ltd., INDIA

Mr. Samir Rawte, Mahindra & Mahindra Ltd., INDIA

Mr. Jeyevijeyan RS, Mahindra & Mahindra Ltd., INDIA

Mr. Hareesh Krishnan, Mahindra & Mahindra Ltd, INDIA

F2020-MML-029
Prediction of Ductile Fracture Propagation of Ultra High Strength Steels

Dr. Kentaro Sato, JFE Steel Corporation, JAPAN

Mr. Takayuki Futatsuka, JFE Steel Corporation, JAPAN

Mr. Hideyuki Okada, Honda R&D Co., Ltd., JAPAN

Mr. Kenichiro Fukagawa, Honda R&D Co., Ltd., JAPAN

Mr. Takafumi Ohya, Honda R&D Co., Ltd., JAPAN

Dr. Toshirou Amaishi, JSOL Corporation, JAPAN

F2020-MML-031
The Lightwheight Design of Anticollision Beam of 7075 Aluminum Alloy patch panel mixed with Corbon Fiber Reinforced Composites

Dr. Eng. Zhimin Liu, BAIC Motor Co.Ltd., CHINA

Mr. Leigang Chen, BAIC Motor Co.Ltd., CHINA

F2020-MML-043
Use Energy Transition to Advance from Car to Auto-Mobile

Mr. Ralph Panhuyzen, SEV Platform, NETHERLANDS

F2020-MML-044
Wear and Friction of PTFE and PEEK Coated Cast Iron Piston Ring

Prof. Dr. Rajendran Raj, Centre for Automotive Materials, SRM Institute of Science and Technology, INDIA

Mr. Shashank Rao, Clemson University, UNITED STATES

Mr. Nagendra Mandapati, SRMIST, INDIA

Dr. Tamilarasan T.R, Crescent Institute of Science and Technology, INDIA

F2020-MML-047
Design And Analysis of Light Weight Helical Gear Limited Slip Differential For Racing Car Applications

Mr. Shrinivas Tarte, BAJAJ Auto India, INDIA

F2020-MML-052
Bimetal Mixture Forging Process and Its Influence on Intermetallic Phase Seam Properties for An Automotive Component

Dr. Ajeet Babu Parasumanna, The Automotive Research Association of India, INDIA

F2020-MML-059
Carbon Fiber Composite Chassis Components, Opportunities and Challenges

Dr. David Wagner, Ford Motor Company, UNITED STATES

Mr. Daniel Mainz, Ford Motor Company, GERMANY

Mr. Thomas Gerhards, Ford Motor Company, GERMANY

Dr. Xiaoming Chen, Ford Motor Company, UNITED STATES