Promoting excellence in mobility engineering

arrow&v
EB2021-STP-021
NVH - Fundamentals

Zicheng Wang, Cranfield University, UNITED KINGDOM
Prof. Steve James, Cranfield University, UNITED KINGDOM
Prof. Marko Tirovic, Cranfield University, UNITED KINGDOM

EB2021-STP-020
Advanced Coatings for Brake Components

Asmawi Sanuddin, University of Leeds, UNITED KINGDOM
Prof. David Barton, University of Leeds, UNITED KINGDOM
Dr. Peter Brooks, University of Leeds, UNITED KINGDOM
Dr. Carl Gilkeson, University of Leeds, UNITED KINGDOM
Dr. Shahriar Kosarieh, University of Leeds, UNITED KINGDOM
Prof. Suman Shrestha, Keronite International Ltd, UNITED KINGDOM

EB2021-STP-019
Simulation, Testing, Innovative Development Processes (Rail)

Daisuke Hijikata, Railway Technical Research Institute, JAPAN

EB2021-STP-018
Posters

Armin Diller, RENK Test System GmbH, GERMANY

EB2021-STP-017
Posters

Seung Bok Kim, Sun Bee Instruments Inc., REPUBLIC OF KOREA

EB2021-STP-016
Materials, Manufacturing and Design (Rail)

Dr. Eng. Mandeep Singh Walia, Green Cargo AB, SWEDEN
Dr. Eng. GaëlLe Gigan, Volvo Car Corporation, SWEDEN
Bjarke Raaby, Green Cargo AB, SWEDEN
Dr. Eng. Tore Vernersson, Chalmers University of Technology, SWEDEN
Prof. Roger Lundén, Chalmers University of Technology, SWEDEN

EB2021-STP-015
NVH - Vehicle Applications

Ing. Fabio Squadrani, Applus IDIADA, SPAIN
Danilo Mendes Pedroso, Applus IDIADA, SPAIN
Kenneth Mendoza, Applus IDIADA, SPAIN
Dr. Eng. Juan J. Garcia Bonito, Applus IDIADA, SPAIN
Juan Pablo Barles, Applus IDIADA, SPAIN
Antonio Rubio, Applus IDIADA, SPAIN
Antonio Jesus Contreras, Applus IDIADA, SPAIN
Jose Francisco Martinez, Applus IDIADA, SPAIN

EB2021-STP-014
Advanced Manufacturing and CO2 Mitigation

Dr. -Ing. Alex Van den Bossche, GrindoSonic, BELGIUM
iLse Clijsters, GrindoSonic, BELGIUM

EB2021-STP-013
Brake Emissions Microscopic Level

Sven Brandt, TU Braunschweig, Institute of Particle Technology, GERMANY
Prof. Dr. -Ing. Carsten Schilde, Institute of Particle Technology, GERMANY
Prof. Dr. -Ing. Georg-Peter Ostermeyer, Institute of Dynamic and Vibrations, GERMANY
Prof. Dr. -Ing. Arno Kwade, Institute of Particle Technology, GERMANY
Malte Sandgaard, Institute of Dynamic and Vibrations, GERMANY

EB2021-STP-012
Advanced Coatings for Brake Components

Dr. Marco Bandiera, Brembo Spa, ITALY
Dr. Federico Bertasi, Brembo Spa, ITALY
Dr. Alessandro Mancini, Brembo Spa, ITALY
Dr. Andrea Bonfanti, Brembo Spa, ITALY
Prof. Massimiliano Bestetti, Politecnico di Milano, ITALY

EB2021-STP-011
NVH - Vehicle Applications

Dipl.‑Ing. Severin Huemer‑Kals, Graz University of Technology, AUSTRIA

Máté Tóth, Graz University of Technology, AUSTRIA

Dipl.‑Ing. Dominik Angerer, Graz University of Technology, AUSTRIA

Dipl.‑Ing. Manuel Pürscher, Graz University of Technology, AUSTRIA

Federico Coren, Graz University of Technology, AUSTRIA

Prof. Jurij Prezelj, University of Ljubljana, SLOVENIA

Martin Zacharczuk, Mercedes‑Benz AG, GERMANY

EB2021-STP-010
Simulation, Testing, Innovative Development Processes (Rail)

Andreas Krumm, TU Braunschweig, GERMANY

EB2021-STP-009
Innovative Brake Rotors

Dipl.-Ing. Steffen Sturm, InfraTec, GERMANY

EB2021-STP-008
Posters

Mohammad Ravanbod, University of Bradford, UNITED KINGDOM

EB2021-STP-007
Fundamentals of Friction

Felix Rickhoff, TU Braunschweig, Institute of Dynamics and Vibrations, GERMANY
Prof. Dr. -Ing. Georg-Peter Ostermeyer, TU Braunschweig, GERMANY
Chengyuan Fang, TU Braunschweig, Institute of Dynamics and Vibrations, GERMANY

EB2021-STP-006
NVH - Fundamentals

Chengyuan Fang, Institute of Dynamics and Vibration of TU Braunschweig GERMANY
Prof. Dr. -Ing.Georg-Peter Ostermeyer, TU Braunschweig, GERMANY
Guido Lehne-Wandrey, Institute of Dynamics and Vibration of TU Braunschweig, GERMANY
Malte Sandgaard, Institute of Dynamics and Vibration of TU Braunschweig, GERMANY
Alexander Vogel, Institute of Dynamics and Vibration of TU Braunschweig, GERMANY
Jacek Kijanski, Institute of Dynamics and Vibration of TU Braunschweig, GERMANY
Thomas Hillner, wenglor sensoric GmbH, GERMANY
Fabian Repetz, wenglor sensoric GmbH, GERMANY

EB2021-STP-005
Brake Emissions Microscopic Level

Jacek Kijanski, TU Braunschweig, GERMANY
Prof. Dr. -Ing. Georg-Peter Ostermeyer, TU Braunschweig, GERMANY
Alexander Vogel, TU Braunschweig, GERMANY
Malte Sandgaard, TU Braunschweig, GERMANY
Guido Lehne-Wandrey, TU Braunschweig, GERMANY

EB2021-STP-004
Brake Emissions Macroscopic Part 2

Guido Lehne-Wandrey, TU Braunschweig, GERMANY
Jan Malte Sandgaard, TU Braunschweig, GERMANY
Prof. Dr. -Ing. Georg-Peter Ostermeyer, TU Braunschweig, GERMANY

EB2021-STP-003
Intelligent Braking and Braking Control (Rail)

Luc Imbert, Wabtec, ITALY
Matteo Frea, Wabtec, ITALY

EB2021-STP-002
Brake Emissions Microscopic Level

Fabian Limmer, University of Leeds, UNITED KINGDOM
Prof. David Barton, University of Leeds, UNITED KINGDOM
Prof. Anne Neville, University of Leeds, UNITED KINGDOM
Dr. Peter Brooks, University of Leeds, UNITED KINGDOM
Dr. Shahriar Kosarieh, University of Leeds, UNITED KINGDOM

EB2021-MFM-003
Intelligent Braking and Braking Control (Rail)

Denis Emorine, ALSTOM, GERMANY

EB2021-MFM-002
International Regulations and Standards - ISO Project Review

Andreas Jandl, VRI - Verband der Reibbelagindustrie e.V., GERMANY

EB2021-MFM-001
Advanced Coatings for Brake Components

Dr.-Ing. Tobias Phillip Utsch, HPL Technologies GmbH, GERMANY
Dominik Dobrzanski, HPL Technologies GmbH, GERMANY
Prof. Dr.-Ing. Johannes Henrich Schleifenbaum, DAP RWTH Aachen, GERMANY
Reiner Becker, RB Tech Consult GmbH, GERMANY

EB2021-MDS-012
Advances in Rotor Technology

Dr. Eng. Samuel Awe, Automotive Components Floby AB, SWEDEN

EB2021-MDS-011
Environmentally Friendly Formulations

Bhaskar Bhatt, IIT Delhi, INDIA
Umesh Marathe, IIT Delhi, INDIA
Meghashree Padhan, IIT Delhi, INDIA
Dr. Jayashree Bijwe, IIT Delhi, INDIA

EB2021-MDS-010
Materials, Manufacturing and Design (Rail)

Pablo Monreal, Knorr-Bremse, SPAIN

EB2021-MDS-009
Environmentally Friendly Formulations

Navnath Kalel, IIT Delhi, INDIA
Prof. Dr. Jayashree Bijwe, IIT Delhi, INDIA
Prof. Dr. Ashish Darpe, IIT Delhi, INDIA

EB2021-MDS-008
Advanced Coatings for Brake Components

Stephan Koß, RWTH Aachen University - Digital Additive Production DAP, GERMANY
Klaus Käsgen, Ford, GERMANY
Dr.-Ing. Jarek Grochowicz, Ford, GERMANY
Marc Rettig, Ford, GERMANY
Stephan Ziegler, RWTH Aachen University - Digital Additive Production DAP, GERMANY
Prof. Dr.-Ing. Johannes Henrich Schleifenbaum, RWTH Aachen University - Digital Additive Production DAP, GERMANY

EB2021-MDS-007
Environmentally Friendly Formulations

Dr. Federico Bertasi, Brembo Spa, ITALY
Dr. Marco Bandiera, Brembo Spa, ITALY
Dr. Andrea Bonfanti, Brembo Spa, ITALY

EB2021-MDS-006
Challenges around Long-Life Friction Couples

Ing. Franco Arosio, Oerlikon, GERMANY
Dr. -Ing. Ingo Lange, Oerlikon, SWITZERLAND

EB2021-MDS-005
Posters

Swapnil Kumar, University of Louisville, UNITED STATES
Dr. Thundil Karuppa Raj Rajagopal, Vellore Institute of Technology, Vellore, INDIA

EB2021-MDS-004
Innovative Raw Materials

Dr. M.A. Sai Balaji, B S Abdur Rahman Crescent Inst. of Science & Technology, INDIA
S. Habib Rahmathulla, Indian Friction Material Engineering Company, INDIA
H. Sultan Navid, Indian Friction Material Engineering Company, INDIA
Eakambaram Arumugam, B S Abdur Rahman Crescent Inst. of Science & Technology, INDIA
P. Baskara Sethupathi, SRM Institute of Science and Technology, INDIA

EB2021-MDS-003
Advanced Coatings for Brake Components

Dr. Eng. Hossein Najafi, Oerlikon, SWITZERLAND
Ing. Cameron Eibl, Oerlikon, UNITED STATES
Ing. Franco Arosio, Oerlikon, GERMANY
Dr. Eng. Arkadi Zikin, Oerlikon, SWITZERLAND
Thilo Krah-Tomala, Oerlikon, GERMANY

EB2021-MDS-002
Advances in Rotor Technology

Prof. Dr. Xueyuan Nie, University of Windsor, CANADA
Ran Cai, University of Windsor, CANADA
Jingzeng Zhang, University of Windsor, CANADA
Dr. Jimi Tjong, Ford of Canada, CANADA
Prof. Dr. Raynald Gauvin, McGill University, CANADA

EB2021-MDS-001
Innovative Raw Materials

Ivan Lorenzon, Pometon SpA, JAPAN
Dr. Eng. Carlo Sgarbossa, Pometon SpA, JAPAN

EB2021-IBC-011
Intelligent Braking and Braking Control (Rail)

Luciano Cantone, Associate Professor, University of Rome "Tor Vergata", ITALY

Robert Karbstein, DB Systemtechnik GmbH, GERMANY

EB2021-IBC-010
Intelligent Braking and Braking Control (Rail)

Dipl. -Ing. Thomas Linke, Knorr Bremse Systeme für Schienenfahrzeuge GmbH, GERMANY
Dipl. -Ing. Michael Kohl, Knorr Bremse Systeme für Schienenfahrzeuge GmbH, GERMANY

EB2021-IBC-009
Intelligent Braking and Braking Control (Rail)

Dr. Matteo Frea, Wabtec, ITALY
Luc Imbert, Wabtec, ITALY

EB2021-IBC-007
Intelligent Braking and Braking Control (Rail)

Fabio Ferrara, WABTEC CORPORATION, ITALY
Astengo Federico, WABTEC CORPORATION, ITALY
Matteo Frea, WABTEC CORPORATION, ITALY

EB2021-IBC-006
Brake Control

Lennart Guckes, TU Darmstadt (FZD), GERMANY
Prof. Dr. HermannWinner, TU Darmstadt Fachgebiet Fahrzeugtechnik, GERMANY
Dr. -Ing. Jens Hoffmann, Continental Teves AG & Co. oHG, GERMANY
Sébastien Pla, Continental Teves AG & Co. oHG, GERMANY

EB2021-IBC-004
Simulation, Testing, Innovative Development Processes (Rail)

Prof. Dr. Raphael Pfaff, FH Aachen, GERMANY
Matthias Blumenschein, FH Aachen University of Applied Sciences, GERMANY
Katharina Babilon, FH Aachen, GERMANY

EB2021-IBC-003
Simulation, Testing, Innovative Development Processes (Rail)

Prof. Dr. Raphael Pfaff, FH Aachen, GERMANY
Prof. Dr. Ingo Elsen, FH Aachen University of Applied Sciences, GERMANY
Marcel Remmy, FH Aachen, GERMANY
Simon Westfechtel, FH Aachen, GERMANY

EB2021-IBC-002
Brake Control

Tobias Loss, Robert Bosch GmbH, GERMANY
Dr. -Ing. Simon Peter, Robert Bosch GmbH, GERMANY
Dipl. -Ing. Armin Verhagen, Robert Bosch GmbH, GERMANY
Prof. Dr. -Ing. Daniel Görges, Technische Universität Kaiserslautern, GERMANY

EB2021-IBC-001
AI - Machine Learning / Virtual Development of Electronic Brake Systems

Dr. Kavapatti Sundarkrishnaa, New World Friction ULC Cambridge, Ellen Centre for Advanced Friction Products Limited, CANADA

EB2021-FBR-009
Fundamentals of Friction

Dr. Hoang Long Le Tran, L'École Centrale de Lille, FRANCE
Dr. Anne-Lise Cristol, École Centrale de Lille, FRANCE
Dr. Vincent Magnier, Ecole Polytech Lille, FRANCE
Dr. Jérôme Hosdez, University of Lille, FRANCE

EB2021-FBR-008
Fundamentals of Friction

Dr. Edouard Davin, Centrale Lille, FRANCE
Dr. Laurent Coustenoble, Centrale Lille, FRANCE
Dr. Arnaud Beaurain, University ofLille, FRANCE
Prof. Yannick Desplanques, Centrale Lille, FRANCE

EB2021-FBR-007
Advances in Rotor Technology

Sai Krishna Kancharla, PureForge, UNITED STATES
Rohit Jogineedi, SIUC, UNITED STATES
Vishal Reddy Singireddy, SIUC, UNITED STATES
Prof. Dr. Peter Filip, SIUC, UNITED STATES

EB2021-FBR-006
Innovative Brake Rotors

Rohit Jogineedi, Southern Illinois University Carbondale, UNITED STATES
Vishal Reddy Singireddy, Southern Illinois University Carbondale, UNITED STATES
Sai Krishna Kancharla, PureForge, UNITED STATES
Dr. Peter Filip, Southern Illinois University Carbondale, UNITED STATES

EB2021-FBR-005
Simulation, Testing, Innovative Development Processes (Rail)

Dr. Quan Wang, Tribology Research InstituteSouthwest Jiaotong University, CHINA
Dr. Zhiwei Wang, Tribology Research Institute Southwest Jiaotong University, CHINA
Prof. Jiliang Mo, Tribology Research Institute Southwest Jiaotong University, CHINA

EB2021-FBR-004
Materials, Manufacturing and Design (Rail)

Dr. Qiang Liu, Tribology Research Institute Southwest Jiaotong University, CHINA
Prof. Jiliang Mo, Tribology Research Institute Southwest Jiaotong University, CHINA
Dr. Zaiyu Xiang, Tribology Research Institute Southwest Jiaotong University, CHINA
Dr. Anyu Wang, Tribology Research Institute Southwest Jiaotong University, CHINA
Wei Chen, Tribology Research Institute Southwest Jiaotong University, CHINA
Honghua Qian, Tribology Research Institute Southwest Jiaotong University, CHINA

EB2021-FBR-003
Innovative Raw Materials

Gabriela Macías, Rimsa Metal Technology S.A, SPAIN
Dr. Carlos Lorenzana, Rimsa Metal Technology S.A, SPAIN
Prof. Dr. Javier Fernandez, University of Barcelona, SPAIN

EB2021-FBR-002
Brake Emissions Macroscopic Part 1

Shotaro Imai, ADVICS CO. LTD., JAPAN
Katsuya Okayama, ADVICS CO. LTD., JAPAN
Koji Sugimoto, ADVICS CO. LTD., JAPAN
Noriko Matsunaga, ADVICS CO. LTD., JAPAN

EB2021-FBR-001
Fundamentals of Friction

Jacek Kijanski, TU Braunschweig, GERMANY
Prof. Dr. -Ing. Georg-Peter Ostermeyer, TU Braunschweig, GERMANY

EB2021-EBS-011
Materials, Manufacturing and Design (Rail)

Denis Emorine, ALSTOM, GERMANY

EB2021-EBS-010
Posters

Ir. Saša Vasiljević, Academy of Professional Studies Šumadija, Department in Kragujevac, SERBIA
Prof. Dr. Jasna Glišović, University of Kragujevac, Faculty of Engineering, SERBIA
Ir. Nadica Stojanović, University of Kragujevac, Faculty of Engineering, SERBIA
Ir. Ivan Grujić, University of Kragujevac, Faculty of Engineering, SERBIA

EB2021-EBS-008
Brake Emissions Macroscopic Part 2

Dipl. -Ing. Christof Danner, AVL List GmbH, AUSTRIA

EB2021-EBS-007
Posters

Vanvirsinh Chauhan, IIT Delhi, INDIA
Prof. Dr. Jayashree Bijwe, Indian Institute of Technology, Delhi, INDIA
Prof. Dr. Ashish Darpe, Indian Institute of Technology, Delhi, INDIA

EB2021-EBS-006
Brake Emissions Macroscopic Part 2

Malte Sandgaard, Institute of Dynamic and Vibration, GERMANY
Guido Lehne-Wandrey, Institute of Dynamic and Vibration, GERMANY
Prof. Dr. -Ing. Georg-Peter Ostermeyer, TU Braunschweig, Institute of Dynamic and Vibration, GERMANY

EB2021-EBS-005
Posters

Ana Paula Gomes Nogueira, University of Trento, ITALY
Stefano Candeo, University of Trento, ITALY
Prof. Dr. Giovanni Straffelini, University of Trento, ITALY

EB2021-EBS-004
Brake Emissions Macroscopic Part 2

Hartmut Niemann, TU Darmstadt, GERMANY
Prof. Dr. Hermann Winner, TU Darmstadt, GERMANY
Dr. -Ing. Christof Asbach, Institute of Energy and Environmental Technology, GERMANY
Heinz Kaminski, Institute of Energy and Environmental Technology, GERMANY
Georg Frentz, Daimler AG, GERMANY

EB2021-EBS-003
Brake Emissions Macroscopic Part 1

Katharina Kolbeck, BMW/ TU Ilmenau, GERMANY
Matthias Bernhard, BMW, GERMANY
Thomas Schröder, BMW, GERMANY
David Hesse, TU Ilmenau, GERMANY
Prof. Dr.-Ing. Klaus Augsburg, TU Ilmenau, GERMANY

EB2021-EBS-002
Innovative Brake Rotors

Ahmed Oshinibosi, School of Mechanical Engineering, UNITED KINGDOM
Prof. David Barton, University of Leeds, UNITED KINGDOM
Dr. Peter Brooks, University of Leeds, UNITED KINGDOM
Dr. Carl Gilkeson, University of Leeds, UNITED KINGDOM

EB2020-STP-073
NVH - Vehicle Applications

Dr. -Ing. Nils Perzborn, ZF Group, GERMANY
Dr. -Ing. Torsten Treyde, ZF Group, GERMANY

EB2020-STP-069
High Performance Products

Ing. Xabier Ugarte, TMD Performance GmbH, GERMANY
Dipl. -Ing. Jürgen Voigt, TMD Performance GmbH, GERMANY
Ing. Daniel Heiderich, HRW Hochschule Ruhr West, Institut Maschinenbau, GERMANY

EB2020-STP-068
AI - Machine Learning / Virtual Development of Electronic Brake Systems

Steve Miller, MathWorks, GERMANY
Jan Janse van Rensburg, MathWorks, GERMANY

EB2020-STP-065
High Performance Products

David Clegg, Alcon Components Limited, UNITED KINGDOM
Garry Wiseman, Alcon Components Limited, UNITED KINGDOM
Dr. Andrew Smith, Alcon Components Limited, UNITED KINGDOM

EB2020-STP-064
Brakes and Components in EV

Carlos Agudelo, Link Engineering Co., UNITED STATES
Marco Zessinger, Link Europe GmbH, GERMANY
David Antanaitis, General Motors, UNITED STATES
Michael Peperhowe, dSPACE GmbH, GERMANY

EB2020-STP-063
International Regulations and Standards - ISO Project Review

Carlos Agudelo, Link Engineering Co., UNITED STATES

EB2020-STP-058
NVH - Fundamentals

Hayuru Inoue, Hitachi Astemo, JAPAN

EB2020-STP-057
Advances in Rotor Technology

Prof. Dr. Peter Blaschke, TH-Wildau, GERMANY
Daniel Alarcon, TH-Wildau, GERMANY

EB2020-STP-052
AI - Machine Learning / Virtual Development of Electronic Brake Systems

Wiebke Wienands, Continental Teves AG & Co. oHG, GERMANY
Dr.-Ing. Gunther Seipel, Continental Teves AG & Co. oHG, GERMANY
Dr.-Ing. Marcus Schumann, Continental Teves AG & Co. oHG, GERMANY

EB2020-STP-051
Posters

Dipl.‑Ing. Ioannis Karypidis, BETA CAE Systems, GREECE
Ing. Federico Zaramella, BETA CAE Italy Srl, ITALY

EB2020-STP-049
Posters

Aihong Li, Zhuhai Glory Friction Material Co., Ltd., CHINA
Kang Li, Zhuhai Glory Friction Material Co., Ltd., CHINA
Jianguo Zhang, Zhuhai Glory Friction Material Co., Ltd., CHINA
Jianghong Long, Zhuhai Glory Friction Material Co., Ltd., CHINA
Otto Schmitt, Zhuhai Glory Friction Material Co., Ltd., GERMANY

EB2020-STP-045
Posters

Dr.‑Ing. Florence Vivier, ITT Italia srl, ITALY
Dr. Diego Pellerej, ITT Italia srl, ITALY
Ing. Andrea Della Rovere, ITT Italia srl, ITALY
Dr.‑Ing. Paolo Galimberti, ITT Italia srl, ITALY

EB2020-STP-038
Challenges around Long-Life Friction Couples

Dr. -Ing. Michael Klein, INTES GmbH, GERMANY

EB2020-STP-034
AI - Machine Learning / Virtual Development of Electronic Brake Systems

Dipl. -Ing. Andreas Hofmann, Robert Bosch GmbH, GERMANY
Hagen Klein, Robert Bosch GmbH, GERMANY
Rohan Deshetti, Robert Bosch GmbH, GERMANY
Stefan Breuer, Audi AG, GERMANY

EB2020-STP-018
Brake Emissions Macroscopic Part 1

Carlos Agudelo, Link Engineering Co., UNITED STATES
Dr. Eng. Ravi Teja Vedula, Link Engineering Co., UNITED STATES
Quinn O'Hare, Link Engineering Co., UNITED STATES
Dr. Eng. Jaroslaw Grochowicz, Ford Werke GmbH, GERMANY
Dr. Theodoros Grigoratos, European Commission Joint Research Centre, ITALY

EB2020-STP-017
NVH - Fundamentals

Ing. Alessandro Lazzari, University of Rome 'La Sapienza', ITALY
Simona Totaro, University of Rome 'La Sapienza', ITALY
Dr.-Ing. Davide Tonazzi, University of Rome 'La Sapienza', ITALY
Prof. Dr. -Ing. Aurélien Saulot, INSA-Lyon, FRANCE
Prof. Dr. -Ing. Francesco Massi, University of Rome 'La Sapienza', ITALY

EB2020-STP-016
Challenges around Long-Life Friction Couples

Meechai Sriwiboon, Compact International(1994) Co. Ltd., THAILAND
Kritsana Kaewlob, Compact International(1994) Co. Ltd., THAILAND
Seong Rhee, SKR Consulting, UNITED STATES

EB2020-STP-013
NVH - Fundamentals

JaeKeun Hwang, Hyundai Motor Company, REPUBLIC OF KOREA
Jeungkyu Kim, Hyundai Motor Company, REPUBLIC OF KOREA

EB2020-STP-012
Posters

Dagmar Metzger, RTE Akustik+Prüftechnik GmbH, GERMANY
Jörg Ritter, RTE Akustik+Prüftechnik, GERMANY

EB2020-STP-010
Posters

Dr. Juan J. Garcia, Applus IDIADA, SPAIN
Bernat Ferrer, Applus IDIADA, SPAIN
Fabio Squadrani, Applus IDIADA, SPAIN

EB2020-STP-008
NVH - Vehicle Applications

Narcís Molina Montasell, Applus IDIADA,SPAIN
Dr. Juan Jesús García Bonito, Applus IDIADA, SPAIN
Amadeu Martorell Branchat, Applus IDIADA, SPAIN
Ing. Fabio Squadrani, Applus IDIADA, SPAIN

EB2020-STP-006
Brakes and Components in EV

Dr.‑Ing. Gerrit Nowald, Continental Teves AG & Co.oHG, GERMANY
Dr.‑Ing. Benjamin Siegl, Continental Teves AG & Co.oHG, GERMANY

EB2020-STP-005
Posters

Dipl.‑Ing. Yasin Hacısalihoğlu, Ford Otosan, TURKEY
Dilek Bayrak Akça, Ford Otosan, TURKEY
Öznur Çetin, Ford Otosan, TURKEY
Dr.‑Ing. Ibrahim Can Guleryüz, Ege Fren, TURKEY
Dipl.‑Ing. Barış Yılmaz, Ege Fren, TURKEY

EB2020-STP-004
Posters

Dr. Jinghan Tang, Jaguar Land Rover, UNITED KINGDOM
Jibran Bamber, Jaguar Land Rover, UNITED KINGDOM

EB2020-STP-003
NVH - Vehicle Applications

Merten Stender, Hamburg University of Technology, GERMANY
Nadine Jendrysik, Hamburg University of Technology, GERMANY
Daniel Schoepflin, Hamburg University of Technology, GERMANY
Prof. Dr. David Spieler, University of Applied Sciences Munich, GERMANY
Dr. -Ing. Merten Tiedemann, Audi AG, GERMANY
Prof. Dr. Norbert Hoffmann, Hamburg University of Technology, GERMANY

EB2020-MFM-013
International Regulations and Standards - ISO Project Review

Carlos Agudelo, Link Engineering Co., UNITED STATES

EB2020-MFM-012
International Regulations and Standards - ISO Project Review

Dr. Agusti Sin, ITT Friction Technologies, ITALY

EB2020-MFM-010
Advanced Manufacturing and CO2 Mitigation

Andreas Meyer, AUT-FIT Automatisierungstechnik GmbH, GERMANY
Karsten Fischer, Fischer Consulting, GERMANY

EB2020-MFM-007
International Regulations and Standards - ISO Project Review

Nicolae Penta, TMD Friction Romania, ROMANIA

EB2020-MFM-004
Advanced Manufacturing and CO2 Mitigation

Karsten Fischer, Fischer Consulting, GERMANY

EB2020-MFM-003
Advanced Manufacturing and CO2 Mitigation

Ing. Francesco Niccoli, COMEC Grinding Machines and Presses, ITALY
Marco Sartori, COMEC Grinding Machines and Presses, ITALY

EB2020-MDS-036
Innovative Raw Materials

Dr. Yakov Epshteyn, Climax Molybdenum, UNITED STATES
Lawrence Corte, Climax Molybdenum, UNITED STATES

EB2020-MDS-035
Brake Emissions Microscopic Level

Florian Gulden, AUDI AG, GERMANY
Dr. -Ing. Sebastian Gramstat, AUDI AG, GERMANY

Dr. -Ing. Anton Stich, AUDI AG, GERMANY
Dr. Agusti Sin, ITT Friction Technologies, ITALY
Simone Ansaloni, ITT Italia S.R.L., ITALY
Dr. Heinz Hoeppel, Friedrich Alexander Universität Erlangen-Nürnberg, GERMANY
Prof. Ulrich Tetzlaff, TH Ingolstadt, GERMANY
Anders Eklund, Automotive Components Floby AB, SWEDEN
Adam Thomas, Automotive Components Floby AB, SWEDEN

EB2020-MDS-030
Posters

Dr. Nico Langhof, University of Bayreuth, GERMANY
Felix Wich, University of Bayreuth, GERMANY
Prof. Dr.‑Ing. Walter Krenkel, University of Bayreuth, GERMANY

EB2020-MDS-029
Posters

Etienne Brisson, Kuma Brake Pads, CANADA
Felix Belanger, Kuma Brake Pads, CANADA

EB2020-MDS-023
Innovative Brake Rotors

Aditya Kumar, University of Petroleum and Energy Studies, INDIA
Swapnil Bhurat, University of Petroleum and Energy Studies, INDIA