See FISITA Library items from Navnath Kalel
Mr. Navnath Kalel, IIT Delhi, INDIA
Prof. Dr. Jayashree Bijwe, IIT Delhi, INDIA
Prof. Dr. Ashish Darpe, IIT Delhi, INDIA
Metallic particles in various amounts are commonly used in the brake-pad-formulations to improve the friction, mechanical strength, thermal conductivity, heat dissipation, fade etc. The same metallic particles, however, lead to increase in wear.
To overcome the wear related problem and to improve the tribo-performance further, wettability/surface free-energy (SFE) of metallic particles needs to be improved so that they will not be easily dug out contributing to higher wear that without metal particles. Current era is of copper-free friction materials. Hence, in this work, stainless steel particles (SSPs) and copper particles were treated with low pressure argon plasma gas using optimised processing parameters (viz., gas- Argon, power- 500 W, treatment time-20 min.,). A series of four multi-ingredient brake-pads using identical composition but differing in the theme-ingredients (3 vol.%) was developed. First two types of brake-pads were based on untreated identical sized particles (SSPs and Cu) and another two types of brake-pads were based on plasma treated particles. One more type of brake-pad was developed without metallic particles. The developed brake-pads were evaluated for different physical, mechanical and chemical properties. Tribological performance was evaluated on a full-scale dynamometer following test schedule (JASO C406). Additionally, noise-vibration (NV) performance was evaluated on NV test rig following SAE J 2521 (partly) test schedule.
Results revealed that most of the tribological properties along with NV properties were improved for treated particles in brake-pads. The topography of worn brake-pads was done to understand the wear mechanisms.
Error message goes here.
Mr. Navnath Kalel completed his M. Tech. (Mechanical Design Engineering) and currently is pursuing for Ph. D. in the area of Environmental-friendly Automotive Brake-pads in Indian Institute of Technology, Delhi, India. He has published 6 papers in International research journals and some in conferences.
Looking for post doc position in the area of materials, tribology, noise, vibration or related to mechanical engineering.
Mr. Navnath Kalel
FISITA Committees & Groups
News on FISITA Spotlight
16 July 2021
Stay up to date with FISITA Spotlight
Excerpt from the blog goes here - this will give the reader a brief snapshot of what the post is about...
16 July 2021